3″ PVC SUCTION STRAINER FOR LBC-50/60
* The LBC model shown above are compatible for other brand / model of Cooling Tower
-
-
3/4″ COPPER BALL VALVE – 15.0hp – 20.0hp
– No pressure drop in flow.
– Only turn 1/4 circle to make valve full open or full close.
– Turning stop for full open or full close.
– Full open and full close mark on top of valve stem.
– Two-direction flow is available.
– Argon arc welded structure.
– Explosion-proof valve stem design.
– Modified PTFE sealing.
– Inside liquid accumulation is avoided.
– Could be mounted on the control panel. -
3/4″ FLOAT VALVE FOR LBC-40-50-60-70-80
Cooling tower float valves are used to maintain the right water levels inside the cooling tower. They regulate and control the water level.
* The LBC model shown above are compatible for other brand / model of Cooling Tower
-
3/4″ SIGHT GLASS – 15.0hp – 20.0hp
Body made out of brass bronze, unbreakable and leak proof front glass, easy reading of moisture content based on colour codes.
-
3/4″ VIBRATION JOINT – 4.0hp – 5.0hp
– Vibration joint is a welded assembly of corrugated metal hose, metal connector, braided metalic wire sleeve, metal clamping ring and red copper tube.
– Vibration joint is used on the suction piping and exhaust piping of a compressor in the refrigeration, cold storage and air conditioning unit.
– Installation Mode: ODF connection soldering is used.
-
3/4″ x 410mm(L) CENTRE POST FOR LBC-500-600-700
* The LBC model shown above for Center Post, Turnbuckle and Tension Wire are compatible for other brand / model of Cooling Tower
-
3/4HP/6P-D – 24mm TECO COOLING TOWER MOTOR – W/O KEYWAY – LBC-25
Cooling tower motors are used to drive the fans for mechanical draft cooling towers. Motors are available in higher efficiencies IE2, IE3, IE4.
-
3/8″ COPPER BALL VALVE – 2.0hp – 5.0hp
– No pressure drop in flow.
– Only turn 1/4 circle to make valve full open or full close.
– Turning stop for full open or full close.
– Full open and full close mark on top of valve stem.
– Two-direction flow is available.
– Argon arc welded structure.
– Explosion-proof valve stem design.
– Modified PTFE sealing.
– Inside liquid accumulation is avoided.
– Could be mounted on the control panel. -
3/8″ SIGHT GLASS – 2.0hp – 5.0hp
Body made out of brass bronze, unbreakable and leak proof front glass, easy reading of moisture content based on colour codes.
-
3/8″ VIBRATION JOINT – 1.0hp – 2.5hp
– Vibration joint is a welded assembly of corrugated metal hose, metal connector, braided metalic wire sleeve, metal clamping ring and red copper tube.
– Vibration joint is used on the suction piping and exhaust piping of a compressor in the refrigeration, cold storage and air conditioning unit.
– Installation Mode: ODF connection soldering is used.
-
30HP/4P-K – 48mm TECO COOLING TOWER MOTOR – WITH KEYWAY – KST/LBC-800-1000
Cooling tower motors are used to drive the fans for mechanical draft cooling towers. Motors are available in higher efficiencies IE2, IE3, IE4.
-
-
3380mm(3400mm) ALUM F/BLADE C/W HUB – KST/LBC 600-700 (SHAFT 42mm – Keyway)
The main function of cooling tower fans is to push and force the air into the cooling tower. Fans are used to move large volumes of air efficiently with minimum vibration and noise. We offer super low noise cooling tower options for use in situations where very low sound is necessary.
-
3580mm(3600mm) ALUM F/BLADE C/W HUB – KST/LBC 800-1000 (SHAFT 48mm – Keyway)
The main function of cooling tower fans is to push and force the air into the cooling tower. Fans are used to move large volumes of air efficiently with minimum vibration and noise. We offer super low noise cooling tower options for use in situations where very low sound is necessary.
-
-
3HP/8P-K – 32mm TECO COOLING TOWER MOTOR – WITH KEYWAY – KST/LBC-100-125
Cooling tower motors are used to drive the fans for mechanical draft cooling towers. Motors are available in higher efficiencies IE2, IE3, IE4.
