Reference: AMC010AC-OP-1
Reference: AMC020AC-OP-1
1. Intelligent temperature control meter which is high-performance, low-cost,good reliability and convenience to use.
2. Can be used to boiler, geo-thermal energy heating equipment, air-condition, electric heater and electric oven, etc.
FADA VALVE TESTING MANIFOLD 536G
New Generation of Vibration Free Gauges
Series of Brass Testing Manifolds For R12 & R22
Product details:
– 4 sizes 1/4″, 3/8″, 3/16″ & 5/16″ square ratchet
Product details:
– 4 sizes 1/4″, 3/16″ square, 9/16″ & 1/2″ hex ratchet
Specification : For 1/8″ ～ 5/8″(3～16mm)O.D.tubing
Material : Zinc alloy
– 可以切铜管、铁管、不锈钢及铝管。
– 在同一直线切断管而不会破裂。
– 光滑是铁轮有一个凹槽可将不良的喇叭口稳固而便于切除。
– 刀片使用SKSⅡ特殊钢材，能够锋利的切断管件。
Specification : For 1/8″ ～ 1-1/8″(3～28mm)O.D.tubing
Material : Aluminum alloy
– 可以切铜管、铁管、不锈钢及铝管。
– 在同一直线切断管而不会破裂。
– 光滑是铁轮有一个凹槽可将不良的喇叭口稳固而便于切除。
– 刀片使用SKSⅡ特殊钢材，能够锋利的切断管件。
Product descriptions:
– CT-200A
– For 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 1″, 1-1/8″, 1-1/4″, 1-3/8″, 1-1/2″ & 1-5/8″ O.D.Tubing.
– With CT-312 and CT-208
– Packing in a hand carrying plastic case
– 手动液压涨管设计，可轻松涨10mm – 42mm直径管子。
– 适合铜管、铝管、钛管、不锈钢管及软铁管。
– 涨头爪由优质硬化钢制成。
Product details:
7” pincn-off plier can pinch off copper tubing up to 1/8” – 1/4” (3 – 6mm) instantly.
Product descriptions:
– CT-275 45° Flaring Tool & 5 Swage Adapters
– CT-274 Tube Cutter 1/8″～1-1/8″ (4～28mm).
– CT-122 Ratchet Wrench ( 1/4″, 3/8″, 3/16″, 5/16″)
– Packaging in a hand carrying plastic case and colour box.
Product descriptions:
– CT-300AL
– For 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 1″, 1-1/8″, 1-1/4″, 1-3/8″, 1-1/2″ & 1-5/8″ O.D.Tubing.
– With CT-107, CT-208 and CT-210
– 手动液压涨管设计，可轻松涨10mm-42mm直径管子。
– 适合铜管、铝管、钛管、不锈钢管及软铁管。
– 涨头爪由优质硬化钢制成。
Specification : For 1/8″ ～ 3/4″(3～ 19mm)O.D.tubing.
Material : Aluminum alloy
– 可以切铜管、铁管、不锈钢及铝管。
– 在同一直线切断管而不会破裂。
– 光滑是铁轮有一个凹槽可将不良的喇叭口稳固而便于切除。
– 刀片使用SKSⅡ特殊钢材，能够锋利的切断管件。
Product details:
For 8”, 9”, 10”, 12”, 14” & 15” spaving per inch.
Product details:
– Fin straightener stainless steel.
– Cleaning & straightening evaporator fin.
