Specification: 10HP
Shell material: carbon steel
Tube material: copper
Water connection: flanged
Refrigerant: R407C / R22
Evaporator temp: 2°C
Condenser temp: 40°C
Sub cool: 5 k
Super heat: 5 k
Water inlet: 12°C
Water outlet: 7°C
Fouling factor: 0.000044 m2k/ w
Specification: 12HP
Shell material: carbon steel
Tube material: copper
Water connection: flanged
Refrigerant: R407C / R22
Evaporator temp: 2°C
Condenser temp: 40°C
Sub cool: 5 k
Super heat: 5 k
Water inlet: 12°C
Water outlet: 7°C
Fouling factor: 0.000044 m2k/ w
Specification: 15HP
Shell material: carbon steel
Tube material: copper
Water connection: flanged
Refrigerant: R407C / R22
Evaporator temp: 2°C
Condenser temp: 40°C
Sub cool: 5 k
Super heat: 5 k
Water inlet: 12°C
Water outlet: 7°C
Fouling factor: 0.000044 m2k/ w
Specification: 20HP
Shell material: carbon steel
Tube material: copper
Water connection: flanged
Refrigerant: R407C / R22
Evaporator temp: 2°C
Condenser temp: 40°C
Sub cool: 5 k
Super heat: 5 k
Water inlet: 12°C
Water outlet: 7°C
Fouling factor: 0.000044 m2k/ w
Specification: 25HP
Shell material: carbon steel
Tube material: copper
Water connection: flanged
Refrigerant: R407C / R22
Evaporator temp: 2°C
Condenser temp: 40°C
Sub cool: 5 k
Super heat: 5 k
Water inlet: 12°C
Water outlet: 7°C
Fouling factor: 0.000044 m2k/ w
Specification: 30HP
Shell material: carbon steel
Tube material: copper
Water connection: flanged
Refrigerant: R407C / R22
Evaporator temp: 2°C
Condenser temp: 40°C
Sub cool: 5 k
Super heat: 5 k
Water inlet: 12°C
Water outlet: 7°C
Fouling factor: 0.000044 m2k/ w
Product descriptions:
– Cuts all sizes of capillary tubes without collapsing nor swaging the tubes.
– 锋利，轻巧，使用方便。在剪切毛细管时，毛细管不会被剪扁。
R22 – 0.9m Refrigeration Charging Hose
Coupling nut contains a molded replaceable gasket and adjustable threaded valve depressor.
Secured with a high pressure eight sided crimp.
Technical Parameters:
Code Number: 1301
Connector: 1/4SAE 5/16SAE 3/8SAE 1/2ACME
Application: R22 / R134a / R404A / R407c / R502
Pressure Rating: 600psi ~ 3000psi
R410 – 0.9m Refrigeration Charging Hose
Coupling nut contains a molded replaceable gasket and adjustable threaded valve depressor.
Secured with a high pressure eight sided crimp.
Technical Parameters:
Code Number: 1302
Connector:
Red – 1/4 SAE-5/16 SAE
Yellow – 1/4 SAE-1/4 SAE
Blue – /4 SAE-5/16 SAE
Application: R410A
Pressure Rating: 800psi ~ 4000psi
Drain pump designed to be fitted beneath high wall indoor units and Ultra fast installation, easy to clean and maintain.
Drain pump for aesthetic and silent installation under the internal split. Complete with alarm cable and power supply for integrated reservoir with 230ml overflow.
Switch the modes between cool and heat; Control temperature by setting the temperature set value and the difference value; Temperature calibration; Refrigerating control output delay protection; Alarm when temperature exceeds temperature limit or when sensor error.
Switch the mode between heating and refrigerating; controlling the temperature by adjusting both the temperature setting value and difference value; delay protection when refrigerating and heating starts; limit the temperature setting range; calibrate the temperature; alarm when sensor error.
STC-8000H is a universal single-sensor temperature controller, with refrigeration, exceeding temperature limit alarm functions. Compressor delay time adjustable, after electrified exceeding temp. limit alarm delay adjustable. Suitable for refrigerant industries such as refrigerator, refrigerator car, etc.
STC-8080A+ is a universal temperature controller with single sensor, specify all the functions as refrigerating, defrosting, alarming when temperature exceeds setting limit.
Compressor delay protection time is solidified as 3 minutes, controller start up and close according to the solidified proportional time when sensor error, which can be applied to the industries such as cold storage, refrigerator car, etc.
Main functions:
– To measure, display and control temperature
– Defrosting cycle and defrosting time is adjustable
– Alarm when temperature exceeds setting temperature limit value
– Compressor start up delay protection
– Compressor work as scheduled time when sensor error
Main functions and features:
1. Multi-control mode among refrigeration, defrost, etc.
2. User menu and administrator menu can be set separately. Not only convenient for user operation, but also left enough space for the adjustment of high-level management.
3. Differential control mode, and the resolution of temperature display is 0.1
4. Multi-protection and alarm mode optional
5. COPYKEY function (optional).